1″ Riser for Deluxe Series binoculars – Oberwerk
Questions? Call us at 937-640-1040 Mon-Fri 9:00am-5:30pm EDT
1″ Riser for Deluxe Series binoculars


1″ Riser for Deluxe Series binoculars

(1 customer review)
1.00 out of 5 based on 1 customer rating


These risers are 1.5″ wide by 1.25″ tall. Solid aluminum, black-anodized, with 1/4-20 stud and 1/4-20 threaded hole on the bottom. When mounting bottom-mount binoculars to large tripod heads or parallelogram mounts, it’s possible for the objectives to contact the mount at narrower IPD settings. This riser adds height so that the full IPD range is available with any type of mount.

Additional information

Weight 1 lbs
Dimensions 4 x 4 x 2 in

1 review for 1″ Riser for Deluxe Series binoculars

  1. Rated 1 out of 5

    JON C CLOSTERMAN (verified owner)

    I never use this. Screw on riser is to small to support the 10 LB binos . Thought it would be a good idea. Cost me 20 bucks.

    • Kevin Busarow

      I disagree about your comment- the adapter is exactly the same diameter as the binocular mount “foot” and simply extends that 1″. The screw is 1/4-20 with a 1590-lb. shear rating- plenty strong for a 10 lb. binocular. If you don’t need it, you can return it for a full refund.

Add a review

Your email address will not be published. Required fields are marked *